Page 1 of 1
No Signal on HDMI after Mr. Fusion
Posted: Tue Jul 19, 2022 6:57 pm
by newcgen
Hi All,
I'm first time user. Mr. Fusion boots OK and I see the install picture.
But after Mr. Fusion reboots, no HDMI signal is present.
the caps lock button works. The LED is on.
Maybe my Mister needs in some configuration?
Could any to help me?
Re: No Signal on HDMI after Mr. Fusion
Posted: Tue Jul 19, 2022 7:29 pm
by newcgen
Linux from the manual works very well.
Re: No Signal on HDMI after Mr. Fusion
Posted: Tue Jul 19, 2022 7:40 pm
by jca
Once I had this problem. I forgot the MISTer.ini file. Rename the MISTer_example.ini to MISTer.ini and see if it helps.
Re: No Signal on HDMI after Mr. Fusion
Posted: Wed Jul 20, 2022 5:58 pm
by newcgen
Just renaming file doesn't help.
Re: No Signal on HDMI after Mr. Fusion
Posted: Wed Jul 20, 2022 6:19 pm
by jca
I was afraid of that: lately it seems it happened to several people. I am not sure if they found a solution. Try to search the forum.
Re: No Signal on HDMI after Mr. Fusion
Posted: Wed Jul 20, 2022 6:26 pm
by jca
Look here:
viewtopic.php?t=5012
Try to ssh into your MISTer and type reboot <Enter> to see if your screen comes up.
Re: No Signal on HDMI after Mr. Fusion
Posted: Thu Jul 21, 2022 8:11 pm
by Malor
I wonder if Terasic has changed something in the DE-10 that messes the Mister system up?
Re: No Signal on HDMI after Mr. Fusion
Posted: Mon Jul 25, 2022 5:52 pm
by aberu
Malor wrote: ↑Thu Jul 21, 2022 8:11 pm
I wonder if Terasic has changed something in the DE-10 that messes the Mister system up?
There are only 3 revisions and plenty of people have tested the later revisions with no issue like this.
Re: No Signal on HDMI after Mr. Fusion
Posted: Mon Jul 25, 2022 9:11 pm
by Xbytez
Just for future reference I have attached the Terasic DE10-Nano revision document, this documents the changes made by the manufacturer to each revision of the DE10-Nano board. The document also explains how to tell which revision of DE10-Nano you have.