Page 1 of 1
Subsitute for 5v Jumper?
Posted: Mon Oct 03, 2022 3:11 pm
by Longtime4321
My I/O board didn't come with a 5v jumper. Can I just use a really short wire?
Re: Subsitute for 5v Jumper?
Posted: Mon Oct 03, 2022 3:24 pm
by Longtime4321
it has come to my attention that it's called a micro jumper and not a 5v jumper. I also found one in a box of stuff I forgot I had, but I still think it would be useful to know for those who don't have one
Re: Subsitute for 5v Jumper?
Posted: Mon Oct 03, 2022 4:42 pm
by Xbytez
They are indeed jumpers, however the correct type has a 2.54mm pitch.
Re: Subsitute for 5v Jumper?
Posted: Mon Oct 03, 2022 5:51 pm
by IRONBERG
Yes you can. I use a short cable.
Re: Subsitute for 5v Jumper?
Posted: Thu Jan 05, 2023 10:04 am
by Bernouilli
My board didn't come with a jumper either. But there was a 0 Ohm resistor soldered on the bottom of the pcb.
I removed it and put a jumper, I now can switch between 3.3v and 5v for the fan