MiSTer FPGA Forum

Posted: **Tue Oct 18, 2022 7:34 pm**

Hello everyone. I recieved my adaptor and followed all 4 steps to use it (jumper, composite sync=1, NTSC switch, and the switch on the Mister to On) and I get this scrolling screen on 2 diffdfent tvs.

Any ideas?

Posted: **Tue Oct 18, 2022 10:12 pm**

I'm not 100% sure, but don't you also need to set Direct_video to =1?

Posted: **Tue Oct 18, 2022 11:55 pm**

Djiem wrote: ↑Tue Oct 18, 2022 10:12 pm I'm not 100% sure, but don't you also need to set Direct_video to =1?

Is that done through the ini?

Posted: **Wed Oct 19, 2022 1:53 am**

Probably a sync on green issue, I had to combine two signals to get it to stop scrolling.
https://www.retrorgb.com/how-to-hook-up ... osite.html
I used a cheap y adapter.

Posted: **Wed Oct 19, 2022 1:35 pm**

djfrijoles wrote: ↑Tue Oct 18, 2022 11:55 pm
Djiem wrote: ↑Tue Oct 18, 2022 10:12 pm I'm not 100% sure, but don't you also need to set Direct_video to =1?
Is that done through the ini?

Yes, it's in the ini file.

Posted: **Wed Oct 19, 2022 8:28 pm**

Djiem wrote: ↑Wed Oct 19, 2022 1:35 pm
djfrijoles wrote: ↑Tue Oct 18, 2022 11:55 pm
Djiem wrote: ↑Tue Oct 18, 2022 10:12 pm I'm not 100% sure, but don't you also need to set Direct_video to =1?
Is that done through the ini?
Yes, it's in the ini file.

Isnt that for outputting analog through the hdmi port?

Posted: **Thu Oct 20, 2022 12:26 am**

Yep, direct_video has nothing to do with the VGA/Analog port.

If you're using composite_sync you might have to make sure that Sync on Green switch is actually off.

Posted: **Thu Oct 20, 2022 1:24 am**

FoxbatStargazer wrote: ↑Thu Oct 20, 2022 12:26 am Yep, direct_video has nothing to do with the VGA/Analog port.

If you're using composite_sync you might have to make sure that Sync on Green switch is actually off.

Thank you. I tried it and it made no difference. I contacted Antonioo and he suggested the following...

vga_scaler=0 and forced_scandoubler=0

which also didnt work. He mentiones Horizontal frequency of 31 khz

Im super frustrated. I was so looking forward to playing on my TV

Posted: **Sat Dec 24, 2022 3:17 am**

I have the same problem. Did you get this resolved?

Posted: **Thu Feb 09, 2023 12:53 am**

Samelak wrote: ↑Sat Dec 24, 2022 3:17 am
I have the same problem. Did you get this resolved?

I did. If you like I can send you my ini file. I changed some settings and it worked

MiSTer FPGA Forum

Scrolling Screen Using Antonio Villenas Composite Adaptor

Scrolling Screen Using Antonio Villenas Composite Adaptor

Re: Scrolling Screen Using Antonio Villenas Composite Adaptor

Re: Scrolling Screen Using Antonio Villenas Composite Adaptor

Re: Scrolling Screen Using Antonio Villenas Composite Adaptor

Re: Scrolling Screen Using Antonio Villenas Composite Adaptor

Re: Scrolling Screen Using Antonio Villenas Composite Adaptor

Re: Scrolling Screen Using Antonio Villenas Composite Adaptor

Re: Scrolling Screen Using Antonio Villenas Composite Adaptor

Re: Scrolling Screen Using Antonio Villenas Composite Adaptor

Re: Scrolling Screen Using Antonio Villenas Composite Adaptor