Tried to add the following for the minimg-aga core. According to mister, screen displays 640x480. how so. Is there something wrong with my syntax. I paste the entire file
[minimig]
vga_scaler=1
video_mode=1600,64,192,304,1200,1,3,46,229500,+hsync,+vsync
Full Mister.ini:
Code: Select all
[MiSTer]
key_menu_as_rgui=0 ; set to 1 to make the MENU key map to RGUI in Minimig (e.g. for Right Amiga)
forced_scandoubler=1 ; set to 1 to run scandoubler on VGA output always (depends on core).
ypbpr=0 ; set to 1 for YPbPr on VGA output.
composite_sync=0 ; set to 1 for composite sync on HSync signal of VGA output.
vga_scaler=0 ; set to 1 to connect VGA to scaler output.
hdmi_audio_96k=0 ; set to 1 for 96khz/16bit HDMI audio (48khz/16bit otherwise)
keyrah_mode=0x18d80002 ; VIDPID of keyrah for special code translation (0x23418037 for Arduino Micro)
vscale_mode=0 ; 0 - scale to fit the screen height.
; 1 - use integer scale only.
; 2 - use 0.5 steps of scale.
; 3 - use 0.25 steps of scale.
; 4 - integer resolution scaling, use core aspect ratio
; 5 - integer resolution scaling, maintain display aspect ratio
vscale_border=0 ; set vertical border for TVs cutting the upper/bottom parts of screen (1-399)
;bootscreen=0 ; uncomment to disable boot screen of some cores like Minimig.
;mouse_throttle=10 ; 1-100 mouse speed divider. Useful for very sensitive mice
rbf_hide_datecode=0 ; 1 - hides datecodes from rbf file names. Press F2 for quick temporary toggle
menu_pal=0 ; 1 - PAL mode for menu core
hdmi_limited=2 ; 1 - use limited (16..235) color range over HDMI
; 2 - use limited (16..255) color range over HDMI, for VGA converters.
direct_video=1 ; 1 - enable core video timing over HDMI, use only with VGA converters.
fb_size=0 ; 0 - automatic, 1 - full size, 2 - 1/2 of resolution, 4 - 1/4 of resolution.
fb_terminal=1 ; 1 - enabled (default), 0 - disabled
osd_timeout=30 ; 5-3600 timeout (in seconds) for OSD to disappear in Menu core. 0 - never timeout.
; Background picture will get darker after double timeout
video_off=0 ; output black frame in Menu core after timeout (is seconds). Valid only if osd_timout is non zero.
osd_rotate=0 ; Display OSD menu rotated, 0 - no rotation, 1 - rotate right (+90°), 2 - rotate left (-90°)
vga_sog=0 ; 1 - enable sync on green (needs analog I/O board v6.0 or newer).
; 1 - enables the recent file loaded/mounted.
; WARNING: This option will enable write to SD card on every load/mount which may wear the SD card after many writes to the same place
; There is also higher chance to corrupt the File System if MiSTer will be reset or powered off while writing.
recents=0
; lastcore - Autoboot the last loaded core (corename autosaved in CONFIG/lastcore.dat) first found on the SD/USB
; lastexactcore - Autoboot the last loaded exact core (corename_yyyymmdd.rbf autosaved in CONFIG/lastcore.dat) first found on the SD/USB
; corename - Autoboot first corename_*.rbf found on the SD/USB
; corename_yyyymmdd.rbf - Autoboot first corename_yyyymmdd.rbf found on the SD/USB
;bootcore=lastcore ; uncomment to autoboot a core, as the last loaded core.
; 10-30 timeout before autoboot, comment for autoboot without timeout.
bootcore_timeout=10
; Option to load the custom font. Format is plain bitmap 8x8.
; Supported sizes of font:
; 768 bytes - chars 32-127 (only alpha + numeric)
; 1024 bytes - chars 0-127
; 1136 bytes - chars 0-141
; up to 2048 - only chars 0-141 will be used.
; if first 32 chars are empty (for sizes 1024 bytes and more) then they are skipped.
font=font/myfont.pf
; USER button emulation by keybaord. Usually it's reset button.
; 0 - lctrl+lalt+ralt (lctrl+lgui+rgui on keyrah)
; 1 - lctrl+lgui+rgui
; 2 - lctrl+lalt+del
; 3 - same as 0 (lctrl+lalt+ralt on keyrah)
reset_combo=0
; !!!!
; Attention: if video_mode is not set in INI, then MiSTer will try to detect
; native mode of display and use it instead.
; Additionally, if dvi_mode is not set (only if video_mode is not set),
; then MiSTer will try to detect if display is DVI.
; !!!!
; set to 1 for DVI mode. Audio won't be transmitted through HDMI in DVI mode.
;dvi_mode=0
; 0 - 1280x720@60
; 1 - 1024x768@60
; 2 - 720x480@60
; 3 - 720x576@50
; 4 - 1280x1024@60
; 5 - 800x600@60
; 6 - 640x480@60
; 7 - 1280x720@50
; 8 - 1920x1080@60
; 9 - 1920x1080@50
;10 - 1366x768@60
;11 - 1024x600@60
;12 - 1920x1440@60
;13 - 2048x1536@60
;14 - 2560x1440@60
;
; custom mode: hact,hfp,hs,hbp,vact,vfp,vs,vbp,Fpix_in_KHz[,hsyncp,vsyncp]
; video_mode=1600,64,192,304,1200,1,3,46,229500,+hsync,+vsync
;
; calculated mode: width,height,refresh[,flags]
; video_mode=1600,1200,85
; flags - cvt=CVT timing, cvtrb=CVT-RB timing (default)
; video_mode=5
; set to 1-10 (seconds) to display video info on startup/change
video_info=0
; Set to 1 for automatic HDMI VSync rate adjust to match original VSync.
; Set to 2 for low latency mode (single buffer).
; This option makes video butter smooth like on original emulated system.
; Adjusting is done by changing pixel clock. Not every display supports variable pixel clock.
; For proper adjusting and to reduce possible out of range pixel clock, use 60Hz HDMI video
; modes as a base even for 50Hz systems.
vsync_adjust=0
; If you monitor doesn't support either very low (NTSC monitors may not support PAL) or
; very high (PAL monitors may not support NTSC) then you can set refresh_min and/or refresh_max
; parameters, so vsync_adjust won't be applied for refreshes outside specified.
; These parameters are valid only when vsync_adjust is non-zero.
refresh_min=0
refresh_max=0
; These parameters have the same format as video_mode.
; You need to supply both PAL and NTSC modes if you want vsync_adjust to switch between
; predefined modes as a base. This will reduce the range of pixel clock.
;video_mode_ntsc=0
;video_mode_pal=7
; 1-10 (seconds) to display controller's button map upon first time key press
; 0 - disable
controller_info=6
; JammaSD/J-PAC/I-PAC keys to joysticks translation
; You have to provide correct VID and PID of your input device
; Examples: Legacy J-PAC with Mini-USB or USB capable I-PAC with PS/2 connectors VID=0xD209/PID=0x0301
; USB Capable J-PAC with only PS/2 connectors VID=0x04B4/PID=0x0101
; JammaSD: VID=0x04D8/PID=0xF3AD
jamma_vid=0x04D8
jamma_pid=0xF3AD
; Disable merging input devices. Use if only player 1 works.
; Leave no_merge_pid empty to apply this to all devices with the same VID.
;no_merge_vid=0x045E
;no_merge_pid=0x028E
; Same as above but can add multiple devices (one entry per VIDPID). Format is VIDPID in hex number
;no_merge_vidpid=0x12345678
;no_merge_vidpid=0x11112222
; Speeds in sniper/non-sniper modes of mouse emulation by joystick
; 0 - (default) - faster move in non-sniper mode, slower move in sniper mode.
; 1 - movement speeds are swapped.
sniper_mode=0
; Uncomment following option if you don't want to see a second line for long file names in listing.
;browse_expand=0
; 0 - disable MiSTer logo in Menu core
logo=1
; Custom shared folder for core supporting this feature (currently minimig and ao486 only)
; Can be relative to core's home dir or absolute path.
; Path must exist before core start to use it, or it will fail.
; Make sure USB device is mounted before use shared folder on USB!
shared_folder=
; Custom aspect ratio
;custom_aspect_ratio_1=16:10
;custom_aspect_ratio_2=1:1
; use specific (VID/PID) mouse X movement as a spinner and paddle. Use VID=0xFFFF/PID=0xFFFF to use all mice as spinners.
;spinner_vid=0x1BCF
;spinner_pid=0x0005
; spinner_throttle with base value 100 gives one spinner step per one tick. Higher value makes spinner slower.
; Lower than 100 makes spinner faster. Negative value gives opposite direction.
;spinner_throttle=-50
; 0 - X axis, 1 - Y axis.
;spinner_axis=1
; Default filters for video scaler. Paths must be relative to "Filters" folder without leading slash.
;vfilter_default=LCD Effects/LCD_Effect_07.txt
;vfilter_vertical_default=<some_file>
;vfilter_scanlines_default=<some_file>
; Default filters for audio. Paths must be relative to "Filters_audio" folder without leading slash.
;afilter_default=LPF2000_3tap.txt
; Defines internal joypad mapping from virtual SNES mapping in main to core mapping
; Set to 0 for name mapping (jn) (e.g. A button in SNES core = A button on controller regardless of position on pad)
; Set to 1 for positional mapping (jp) (e.g. A button in SNES core = East button on controller regardless of button name)
gamepad_defaults=0
; Write out file name under the cursor in browser for external integration
; External application or script may parse the info and do some additional actions and/or send info to 3rd party server.
; Warning: it may slowdown the system or add lag while browsing the files in OSD depending on external app/script.
log_file_entry=0
; Automatically disconnect (and shutdown) Bluetooth input device if not use specified amount of time.
; Some controllers have no automatic shutdown built in and will keep connection till battery dry out.
; 0 - don't disconnect automatically, otherwise it's amount of minutes.
bt_auto_disconnect=0
; Reset Bluetooth dongle before pair dialog.
; Some dongles may have problem to pair if not explicitly reset.
; Some dongles (mostly CSR) have problem to pair with BLE if not reset in advance.
; Consequence of reset: some input devices get shutdown after reset.
bt_reset_before_pair=0
;default Shadow Mask
;shmask_default=VGA.txt
;default shadow mask mode:
; 0 - none, 1 - 1x, 2 - 2x, 3 - 1x Rotated, 4 - 2x Rotated
;shmask_mode_default=1
; Wait for specific mount before start the core.
; Attention: waiting is performing BEFORE core start, so no message will be displayed on screen!
; It's useful for debugging when core is loaded from USB blaster and games folder is on USB or Network drive.
; This option cannot be used when defmra in CONFSTR is used (i.e. if arcade rbf is loaded directly not through MRA).
; This option is ignored for Menu core.
;waitmount=/media/usb0
; Overrides for video mode
; When the core's video mode matches the parameters in the section header, any options in the section override options from MiSTer and core sections.
; Refresh rate in header is optional and, if present, must match exactly the output from video_info or the logs. For example, if it says "60.0Hz", the header needs to be "@60.0" to match.
; When the core changes video mode, MiSTer will first look for a matching WIDTHxHEIGHT@VREFRESH section.
; If no match is found, it will fall back to a matching WIDTHxHEIGHT section with no refresh rate.
; If there is still no match, MiSTer/core options will be used without overrides.
; [video=640x400]
; ...
; [video=640x400@70.1]
; ...
; Wheel centering force 0-100. Default is 50.
;wheel_force=50
; Wheel steering angle range. Supported ranges depends on specific wheel model
; If not set then default (depending on driver) range is used
;wheel_range=200
; Enable game mode on HDMI output. It may give you better optimization on some displays, but also
; can give worse result on others. Default is 0 (non-game).
;hdmi_game_mode=1
; Variable Refresh Rate control
; 0 - Do not enable VRR (send no VRR control frames)
; 1 - Auto Detect VRR from display EDID.
; 2 - Force Enable Freesync
; 3 - Force Enable Vesa HDMI Forum VRR
vrr_mode=0
; Minimum framerate in VRR mode.
vrr_min_framerate=0
; Maximum framerate in VRR mode (currently only used in Freesync mode).
vrr_max_framerate=0
; VESA VRR base framerate. Normally set to the current video mode's output framerate
vrr_vesa_framerate=0
[minimig]
vga_scaler=1
video_mode=1600,64,192,304,1200,1,3,46,229500,+hsync,+vsync