Sound Issues

[SpaghettiGawd]

Hi,
After running update all I noticed I'm getting no sound from some arcade cores (such as Commando, Congo Bongo, and others) and low sound from other cores such as Cotton.
I also attached and image of an error code I'm getting.

Any thoughts on what this might be?

[Malor]

I was getting no sound from my digital I/O board Toslink port after the update; at least the PSX core was not working.

A cold reboot fixed it. You could try a hard power cycle, even, to see if that helps.

[jca]

OT:
Was there some kind of disruption somewhere on the internet?
The image above was coming extremely slow, I estimated that it would take 16 min to download.
I also was downloading a file but with horrible speed at 15KB/Sec and mainly ending in failure.
At the same time I could watch 1080p YouTube videos without any glitch or go to other sites without any slowdown. My connection speed was at 70Mbs.
Today everything is back to normal: the image comes almost instantly, the download of the other file proceed at more than 1MB/Sec.

Back to your post:
My MISTer is up to date and I do not experience any of the problems you mentioned.

[FPGA64]

That error is just telling you that you have an out of date ini file. That option has been removed. You should remove it from your ini

[aberu]

I would suggest downloading a new MiSTer.ini since your version is like 3 years old given that error message. Then go through the settings and set it up the way you want it.

https://github.com/MiSTer-devel/Main_Mi ... MiSTer.ini

As for the sound issue, go into the OSD and press left on the joystick, make sure your volume sliders are turned all the way up.