MiSTer FPGA Forum

hello
when starting from the FreeDos HD.img
Initdisk reports
C: HD1 Pri [ 1] ,CHS= 0-1-1 , start= 0 MB, size= 42 MB
blinking cursor
any ideas
booting from FreeDos floppy gives the same
booting from DOS floppy works
any ideas

The description of Quick Start is incorrect.
FreeDOS_HD.img does not work properly when using 8088bios.
If you are using 8088BIOS, please try using other bios.

pcxt_31.ROM works
thanks