The online community for MiSTer FPGA enthusiasts
https://misterfpga.org/
Topic says is. There are a lot of Console Cores wich had a 10 or more Keypad integrated. Is it possible to combine the Keyboard and a Joystick as input device so that the Keypad from the Keyboard is usable with a "normal" Joystick?
These work via daemonbite adaptors
NTT Snes Pad
Just bought one on ebay. Now, none of the daemonbite adapters are available 
HerrBerzerk wrote: ↑Tue May 23, 2023 11:56 amJust bought one on ebay. Now, none of the daemonbite adapters are available
https://www.tindie.com/products/timvill ... dapter-v2/
I use this one its very well made or available as a kit
Does that triple adapter do atari joysticks etc on the db9? Does it have any kind of paddle support?
It works for Atari Style joysticks, I used my Old Amiga Joysticks, Ones that need 5v for Autofire may not work. Paddles I never tried
Paddles don't work with daemonbyte adapters. I recommend getting a Daptor PDL, it works with DB9 joysticks and Atari or Commodore paddles: http://www.2600-daptor.com/2600-daptor%20PDL.htm
What do they mean by "SNAC Paddle Support"?
From the Daptor Homepage:
02/17/23 - Note: the MiSTer 7800/2600 scaling has not been fine tuned yet. The paddle scaling in then core seems to be under going some tweaking with it's recent addition of SNAC paddle support. When that is done, will then dial in the adapter's scaling and post a firmware update. In the mean time, it should be much better then using the default Stella scalling.
LamerDeluxe wrote: ↑Sun May 28, 2023 8:24 amPaddles don't work with daemonbyte adapters. I recommend getting a Daptor PDL, it works with DB9 joysticks and Atari or Commodore paddles: http://www.2600-daptor.com/2600-daptor%20PDL.htm
Is there a guide to follow on configuring MiSTer (main and core) for this? I have the adapter, but can't seem to get it going.
rhester72 wrote: ↑Sun May 28, 2023 11:18 pmLamerDeluxe wrote: ↑Sun May 28, 2023 8:24 amPaddles don't work with daemonbyte adapters. I recommend getting a Daptor PDL, it works with DB9 joysticks and Atari or Commodore paddles: http://www.2600-daptor.com/2600-daptor%20PDL.htm
Is there a guide to follow on configuring MiSTer (main and core) for this? I have the adapter, but can't seem to get it going.
I wrote about how to configure the D9 here: viewtopic.php?p=68155#p68155
For the PDL I just renamed the map file with the correct PID for the PDL adapter.
It will not work with all cores, a number of them are expecting the MiSTer Spinner protocol and calling it 'paddle', which is confusing (the VIC-20 core is a recent example). Cores which accept analog thumb sticks as paddle inputs should work.