Page 1 of 1
Difference between I/O Board v6.0 and v6.1?
Posted: Thu Jul 09, 2020 7:07 pm
by sofakng
Can anybody tell me what was changed between v6.0 and v6.1 for the I/O board and if it's important changes?
Also, what's the difference between the USB bracket and USB bridge?
Re: Difference between I/O Board v6.0 and v6.1?
Posted: Thu Jul 09, 2020 7:38 pm
by Sigismond0
USB Bridge plugs into both micro USB ports at the front:
- P5J3hff.png (215.91 KiB) Viewed 3640 times
USB Bracket plugs into headers on top of the USB board, and the micro USB port on the front of the DE-10.
- bridge.jpg (69.14 KiB) Viewed 3695 times
Both do the same thing, just using different connections on the USB hub board. The only real deciding factor here would be if you have a case, it'll probably based on one or the other of these styles.
Re: Difference between I/O Board v6.0 and v6.1?
Posted: Thu Jul 09, 2020 7:41 pm
by legacypixels
I/O 6.1 has the option for a 7th data pin on the User Port
Re: Difference between I/O Board v6.0 and v6.1?
Posted: Thu Jul 09, 2020 7:44 pm
by sofakng
Got it. Thanks guys!
It looks like the I/O board v6.0 could also be modified to support this 7th data pin? Is the 7th data pin only used for SNAC adapters?
Re: Difference between I/O Board v6.0 and v6.1?
Posted: Fri Jul 10, 2020 1:25 pm
by Sigismond0
Yeah, you can modify the 6.0 board. 7th data pin is used for Sega controllers, I believe.