Analog IO Board External Buttons and LEDs
Posted: Sat Nov 16, 2024 8:14 pm
Hi guys.
I'm looking for a pinout for dummies for P3 and P4 - I have been trying to look at the schematic but I'm afraid to read it wrong.
The online community for MiSTer FPGA enthusiasts
https://misterfpga.org/
Hi guys.
I'm looking for a pinout for dummies for P3 and P4 - I have been trying to look at the schematic but I'm afraid to read it wrong.
Do not be scared my friend
Starting on the side nearest the PCB edge:
P3:
Pin 1 - GND
Pin 2 - Not connected
Pin 3 - Reset
Pin 4 - OSD
Pin 5 - User
P4:
Pin 1 - VCC
Pin 2 - GND
Pin 3 - Not connected
Pin 4 - LED User
Pin 5 - LED Disk
Pin 6 - LED Power
LEDs are GND controlled, so you connect all + pins to pin 1 and each - pin to the respective LED pin.
Thanks a lot for the help. It's much appriciated.